简体中文 ENGLISH
Your present location:Products >> Hardness tester >> Magnitude of hardness tester

 

 
 
 
keyword : Product Category :
  • Proucts Nname: Magnitude of hardness tester
  • Product number: a077
  • Views : 3

Technical parameters

 

 

TH110g

TH120g

 

Error value

Plus or minus 6 HLD (HLD = 760)

 

Repeatability value for

6 the HLD (HLD = 760)

 

To recognize the impact device

D

D, G, DL, C

 

Measure the direction

360 °

 

Hardness standard

HL, HB, HRC

HL, HB, HRC, HRB, HV, HS

 

PC communication

There is no

 

The paper roll diameter

26.7 + / - 0.5 mm

 

Printing paper width

56.5 + / - 0.5 mm

 

Working voltage

4.7 V to 6 V

 

Charging time

6 hours

 

Charging power supply

9 v / 600 ma

 

Installation dimensions

210 * 80 * 35 mm

 

The weight of the

About 0.4 Kg

 

The standard configuration

The host, type D impact device, small support ring, high value standard hardness block, chargers, nylon brush and printing paper

 

 

When the magnitude of hardness tester is used to measure the measured workpiece need to meet certain test conditions, mainly three requirements: workpiece weight is not less than 2 kg, the minimum thickness of not less than 10 mm, the surface roughness is not less than 1.6 um. When do not meet the above conditions must be firmly support or tightly coupled.